Tankless Water Heater Scale Protection

Prevent scale and stop corrosion on your Water, Inc. HousePure® system.

 


LEVEL 1 Tankless Water Heater Scale Prevention

HP-SECURE-.75C

Provides annual protection against costly water heater scaling and sediment build-up. Siliphos® Polyphosphate Media prevents water hardness from scaling on flash heating surfaces. A 5-micron filter reduces sediment, which can cause additional scaling throughout the hot water line. The unique micro-fiber filter construction delivers higher filtration efficiency and flow rates. Ideal for indoor and outdoor installations. Features a 3/4” NPT inlet/outlet with a differential filter change gauge for peace-of-mind. Download specifications sheet here or read below for this model’s details.

 

  • Installation Flexibility of RIGHT or LEFT water inlet: Specify R or L
  • Filter Capacity: One year or when gauge indicates change needed
  • Max Flow Rate: 9 gallons/minute
  • Dimensions: Width: 5.25” Height: 25.75” Depth: 5.5”
  • Includes mounting bracket and filter change spanner wrench
  • Water, Inc electronic filter change monitor included
  • Temperature Range: 40ºF to 100ºF
  • Tools Required: Teflon® tape, adjustable wrench, tube cutter, suitable pipe fittings and inlet gate valve
  • Component Tested to NSF/ANSI Standard 42 for material requirements.

HousePure® Secure Replacement Cartridge

  • Part # WI-HP-SECURE-.75C
  • 20-PK: Shipping Wt: 19 lbs.
  • 1 PK: Shipping Wt: 1 lbs.

 

Capacity: One year or when gauge indicates change needed Replacement Cartridge for HousePure® Secure 3/4” tankless water heater filter system. The 5-micron filter with polyphosphate scale reducing media provides consistent flow rates and superior filtration performance.


 

LEVEL 2 High Flow Tankless Water Heater Scale Prevention

HP-SECURE-1.5C

Provides annual protection against costly water heater scaling and sediment build-up. Siliphos® Polyphosphate Media prevents water hardness from scaling on flash heating surfaces. A dual-gradient 50 over 5 micron filter reduces sediment, which can cause additional scaling throughout the hot water line. Gradient density filter design provides up to three times the dirt-holding capacity of similar size sediment cartridges. The unique micro-fiber filter construction delivers higher filtration efficiency and flow rates. Ideal for indoor and outdoor installations. Features a 1-1/2” NPT inlet/outlet with a pressure change gauge for peace-of-mind. Download specifications sheet here or read below for this model’s details.

 

  • Installation Flexibility of RIGHT or LEFT water inlet: Specify R or L
  • Filter Capacity: One year or when gauge indicates change needed
  • Max Flow Rate: 20 gallons/minute
  • Dimensions: Width: 7.5” Height: 29” Depth: 8.75”
  • Includes a powder-coated mounting bracket and filter change spanner wrench
  • Water, Inc electronic filter change monitor included
  • Temperature range: 40ºF to 100ºF
  • Tools Required: Teflon® tape, adjustable wrench, tube cutter, and suitable pipe fittings and inlet gate valve
  • Component Tested to NSF/ANSI Standard 42 for material requirements.

 

HousePure® Secure Replacement Cartridge

  • Part # WI-HP-SECURE-1.5C
  • 6-PK: Shipping Wt: 23 lbs.
  • 1 PK: Shipping Wt: 4 lbs.

 

Capacity: One year or when gauge indicates change needed Replacement Cartridge for HousePure® Secure 1-1/2” tankless water heater filter system. The dual-gradient 50 over 5 micron filter with polyphosphate scale reducing media provides consistent flow rates and superior filtration performance.