Hydrotech WGR 300

Shown In:

Filtration / Reverse Osmosis

Hydrotech’s WGR Series Commercial Reverse Osmosis Systems remove up to 99% of the total dissolved solids (TDS) in raw commercial feedwater, producing high quality process water for applications such as:

Boiler Feed
Humidification Systems
Drinking Water
Industrial Processes
Food and Beverage Processing
Spot Free Rinse

Standard Features

Membrane: advanced thin film composite for maximum rejection of impurities
Membrane Housing: standard stainless steel housings
Process Pump: direct coupled brass rotary vane type designed for continuous high pressure service
Frame: corrosion resistant powder coated steel
Pre-Sediment Filter: 5 micron rated filter for removal of sediment and protection of system
Pre-Carbon Filter: granular activated radial flow carbon filter for removal of chlorine must be replaced regularly
Pre-Filter Isolation Valve: convenient shut off valve for easy filter replacement
Pressure Gauges: high quality 2.5″ liquid filled process pressure gauge for monitoring operating pressure. 1″ dry pressure gauge’s for monitoring filter operation
Low Pressure Cut-Out: insufficient feed water will automatically shut the system down protecting the process pump
Tank Full Switch: RO system will automatically start when tank pressure falls below 30 psi and stop when pressure reaches 50 psi
Simple Maintenance/Inspection: all WGR series components are strategically located on the frame for easy access and inspection

Optional Features

Float Switch: mechanical float switch for open storage applications